2006 Yamaha Stratoliner "know valves bent 2" Questions

...valves were bent from hitting pistons due tue excessive rpm why would only the rear 2 cyl. be affected and why would the problem get worse over time? I have purchased rebuilt assembled heads to ...

...know to wear prematurely on 05's and the 03 and 04. Yamaha knows about the problem and will fix it under a one time warranty even if you do not have the extended warranty on the bike. Make sure you ...

know it sounds impossible but I heard of it... just check the manifold anyway* (go figure) if its fuel being spat out I''d say pitted/worn/loose/misaligned/bent intake valve(s) on no2. any pinking? if

...160 psi. If you do, the valves are okay. Get back to me by posting a comment if you don't know how to set the cam timing. The following diagram may be self explanitory. Please rate my answer.

valves shud slightly clic with ur hand after ajust-mite hav performed it at exhaust stroke! let me know sounds like you have timing off, reset timing chain crank at tdc cams at 9 & 3 o'clock marks

...know its a valve problem.. did the shims and it ran fine for an hour.. shut it down and it locked up again. the only thing i can think of is that the backpressure from the pinched pipe caused to much ...

...bent or dented so it's hanging. Give everything a thorough cleaning and air blow with with pressure can. If the jetting has been changed out go back to stock jetting. Check to make sure the ...