...reading of0 ohms subtract the reading you do get from any readings you get doing the stator checks in order to get accurate stator circuit readings, otherwise you may have out of range reading due to ...
Question about Yamaha Royal Star Venture Motorcycles
reading of 0 ohms subtract the reading you do get from any readings you get doing the stator checks in order to get accurate stator circuit readings, otherwise you may have out of range reading due to
Question about Yamaha Royal Star Venture Motorcycles
...reading of0 ohms subtract the reading you do get from any readings you get doing the stator checks in order to get accurate stator circuit readings, otherwise you may have out of range reading due to ...
...reading. It should be something like 0.7 ohms or so. Now, touch one lead to the engine and the other lead to either of the two metal contacts in the plug in the engine case. Do not allow that lead to ...
Question about Yamaha Royal Star Venture Motorcycles
...reading coming out the stator with a multimeter. Unplug the Red, black, and green wires coming up from the stator to the ignition. Test the wire for resistance readings (ohms), by placing the red ...
Question about Yamaha Royal Star Venture Motorcycles
...stator without the engine running by putting the meter on the Ohms function...and check between the leads...there should be very low ohms readings between the wires..if you get nothing then a winding ...
Question about Yamaha Motorcycles
...reading be for coil and stator on 2003 yamaha venture 600? Stator & coils have been cleaned, getting an intermittent spark. Looking for the ohm readings to see which is not giving a spark. The Stator ...
Question about Harley Davidson Motorcycles
...ohms reading test and ac voltage output test? This is the second stator I put in this bike in the last year not sure what's causing them to fail but once again my battery is no longer charging and ...
Question about Yamaha Royal Star Venture Motorcycles
ohms but i also read about the same from each phase to ground . Any information would be greatly appriciated . The stator should not have any reading to ground (or at least an extreamly high reading).
21 questions posted
Usually answered in minutes!
86 Questions
59 Questions
44 Questions
34 Questions
22 Questions