2003 Yamaha YZ 125 "head bolt" Questions

i just installed a new top end kit and collent is leaking out the threads on the head bolts Possibilities :: Head bolts not torqued -- Warped head -- Defective head gasket -- Head gasket not installed

engine oil it top ov head on 2 stroke yz 80 im thnkin gaskets any idea's any1 Wash the bike then tighten down the cylinder head bolts. tighten down the head bolts first and then wash it or you will ...

water is coming out of the cylinder head studs Most likely the head gasket. remove it and make sure the surface on the cylinder and head are flat, and replace the gasket if they are good. Be sure to ...

1987 yz 125 rebuild what do i need to torque the cylinder bolts to and head bolts to on a 1987 yz 125 40 foot pounds.

...head of bolt) transfer to your newer model. Yamaha owner's manuals can be viewed on-line or at public libraries for a comparison for model updates etc. http://www.bikepics.com/yamaha/yz125/ provides ...

...take the hole cover off and its straight forward from there or if water is in the crank then your head gasket has blown propally due to being old just make sure if you replace the head gasket you ...

...have to bolts loosened from the caliper, I usually use a painters spatulla or a screw driver flat head, but with the screw driver be very very very carefull not to bend or score your brake

...125 le engine start at the top of the motor and remove anny guards and so on then there are 4-6 head bolts remove them then remove the transmission and all that. remove the starter and stator and ...