2003 Yamaha YZ 125 "1998 compression" Questions

...compression loss on a 1998 yz125? could power valve stick open or closed causing this? it was running fine and gradually has to be pull started. once i get it running it will not open up. it ...

...1998 yamaha yz125. i recently rebuilt the top end. I also put new reeds in it, and new crank sills. It dont have any bottom end power once you get the rpm up you have alot of top end how can i get ...

...1998 yz 125 while it is running gas is pouring out of muffle The only way that can happen is if gas is overflowing in the carb and running down the cylinder wall and into the exhaust port and / or ...

...1998 rm 250 it has a dome piston in it and will not start by kicking it over it will only start by push starting it is that because i have to much compression to kick it over fast enough please help ...

kickstart problem i have xr400r 1996 model n now it is very hard to start .kick is too soft when i kick my kick starter n compressor doesn't compress which i kick Hi crazy Your bike has an automatic ...

I have a LT 50 2002 wont start have spark, 120psi I have a LT 50 2002 wont start, have spark, 120psi compression and have installed new carb,loking for help have spark and compression but do you gave ...

...1998 honda magna motorcycle its gettn fire and gas but won't start First thing you want to do is check your spark plug gap. Improperly gapped plugs can cause a non-start. If all is good there, check ...

...1998 kawa 1100 zzr the problem is strucale to start I must pull the chock and as the motor start to swing I must open the throttel fully and keep it there until bike start and then I must close the ...

...1998 cbr 600 cuts out at low revs and will not start up via ignition button but will by jump start. battery volts are good so battery is charging whilst engine is on, could this be somrthing to do ...

suzuki SX200 become malfunctioned after 20 mns of starting when u turn it on at the morning it is quite good.but after driving about 20 mns it become malfunctioning at the low RPM. have you had any ...