1994 Yamaha FZR 600 "cdi wire" Questions

...wire the 4jh cdi in to the 3he loom. I have a haynes manual which has wiring diagram for both bikes but it dont cover all the wires that come from the 4jh cdi box and there is more connectiing to it ...

...didnt run right! eletrical aint my thing tested what i could with my limited ability everything but cdi didnt have a clue! now it wont start at all does what i said befor! should of said all this ...

my 1991 yamaha fzr 600 wont start last year i had a bad ground, i fried my cdi box, and only had spark on 2 wires. yesterday i got that cdi box, and now i have spark on all 4 but it still wont run, i ...

...coil is doing nothing while the coil for 1&4 has a spark. The coils are also relatively new. The CDI box is fairly new as well but when I took it to Yamaha dealership they told me that one of the ...

...flooded. remove, clean, dry/replace plugs.Incidentally, if no spark on plugs, check connectors to CDI, or starting with the clutch lever pulled. Hope this be of initial help/idea. Pls post back how ...

CDI's ground wire is black/white; (near the stator) single blue to the CDI. Good luck and thank you for asking FixYa. the colours not matching my cdi box What do u mean the blue is connected to ground

wire diagram of 1998). So I would like to send an image of the CDI 1998 that I have acquired and ask to somebody check and send me the actual position of wires on CDI of model 1998. I think the CDI is

cdi Hi i have a 1984 xr 200r and have cdi probs,i am fitting an after market racing cdi box and cant figure out the wires they are differnt colours from engine to cdi any help would be good thanks Do ...

CDI power wire is typically a red wire that runs from the ignition switch to the CDI unit. The ignition switch is usually located on the right side of the handlebar and has three wires connected to it

...wire. CDI is disabled by grounding. Does the KDX have a key switch or just the stop button. Try just connecting the pick up wire to the CDI and CDI to coil. You have to isolate ground to CDI to run. ...