Question about Yamaha XJ 700 X Maxim Motorcycles
gas tank. The petcock has 2 hoses coming from it - the smaller of the two is not a fuel line - it's the vacuum line to trigger the petcock valve and it connects on the hose ****** at the top of the #2
Question about Yamaha XJ 700 X Maxim Motorcycles
...gas coming KDX200 carb float set up. Hi I have gas coming out of the float chamber overflow so obviously need to set the floats but would like to know how to do it without putting carb in and out of ...
...Gas is coming out of the overflow when the gas is in the "on" position. I'm not sure why... Just drained carbs and gas tank to put clean gas in. Bike did start but the gas is still ...
Question about Yamaha XJ 700 X Maxim Motorcycles
gas overflow line coming from carb is pouring out on a 2001 kaw This quad has been sitting for over a year and i'm trying to get it going. It will start but gas is pouring out of this overflow line ...
...gas can come out of that overflow tube as well. Figure out exactly where it's coming from first. Or take a picture, that will help. If it is the carb overflow tube give the carbs a good whack with a ...
...gas dont run it empty and think its good enough its not. The hose is an overflow hose coming from your carb. If the float inside the carb is stuck or gunked up at all, too much gas fills up the float ...
gas is coming out the hose when you turn it on I suggest looking at the carburator and I suspect the hose came off the inlet to the carburator. Thats the only place gas goes after leaving the tank, if
Question about GAS Motorcycles
am getting gas to carb, gas comes out from overflow, am not getting gas to cyllider? Is your main jet on carb clogged? Is your float mechanism working properly?
Question about Yamaha XJ 700 X Maxim Motorcycles
...gas will only be in one of 2 tubes and they are the fuel line from the tank and the carb over flow. unless you have an electronic fuel pump then tubes go from tank to pump to carb. if its coming from ...
Question about Yamaha XJ 700 X Maxim Motorcycles
...bottom tube the gas is overflowing in the carburator and is coming out of the bottom tube. do i need a completely new needle valve set? you might find that the needle isnt in properly check that ...
335 questions posted
Usually answered in minutes!
652 Questions
453 Questions
469 Questions
292 Questions
290 Questions