1985 Yamaha XJ 700 X Maxim "carb" Questions

rear cylinder carb on 85 xv700 virago wont accept gas. was fine when put up last fall.can blow in supply line of front carb but not back carb. The float needle valve has probably stuck in the closed ...

fuel valve for the carbs- is it the screw in the middle behind the carbs? fuel shut off valve is inside the carb located where the floats are what are you trying to do??

pooor acceleration after cleaning carbs on 1986 yamaha xj700 maxima ive reently removed and cleaned the carbs, after installing them the bike fired up right away which it never did before, but a ...

...diameter one is a vacum line that connects to the top of the rubber intake located between the carb and the engine head. you should notice that all four intakes have a vacum port in this

...for 1985 700 yamaha maxim Have 4 lines that just hang down but there 3 lines 1 off the number 1 carb and 1 off the number 4 carb and 1 comes off between the number 2 and 3 carbs where do the 3

where do the 2 fuel lines on back of carbs go because they have fuel in them more than a over flow or breather. and why do i have fuel overfiowing out of left side end carb hi there, the fuel ...

...up. Uneven idle. Please visit this site http://members.tripod.com/dave_jack/id38.htm The Yamaha XJ carbs function in reverse of normal carbs in that the choke is not a choke, but rather an

to get it started, the bike usually has a backfire soon after. Any ideas? All I can think of is the carb, but I don't know how to clean out a carb, nor do I have any way to get it to a shop where they

Carburetor on yamaha xj700 maxim x What make of Carburetor is on yamaha xj700 maxim x 1985 as no numbers are on it and need to replace them as broken? Actually, they're not Hitachi carbs. Since you ...

vaccum line routing on the carburetors of a 1985 yamaha xj700 i had the carbs rebuilt but it took long enough that the guy forgot how the vaccum lines went. i really miss riding my bike and would ...