fokr oil for a dzr 400sm 08 amont G'Day ivan, Fork oil capacity, per leg 182 mL (6.15 US oz) inner rod 350 mL (11.8 US oz) outer tube ------ regards robotek
Question about Motorcycles
...oil in the fork, you can see the top of the rod (its in the center of the fork tube towards the bottom). When refilling, the oil level must be enough, with fork fully extended, to just cover the top ...
Fork oil amount for v rod 2015 How much fork oil for each fork in my 2015 night rod special. I have the genuine HD manual but can't find this info. anywhere. 6.2 Oz per side (dry) and top up to 4.92" ...
Question about Suzuki DR-Z 400 SM Motorcycles
FORK OIL ? Place the front fork vertically without spring. ? Compress it fully. ? Pour specified front fork oil up to the top level of the outer tube.  Capacity (each leg): 490 ml (16.6/17
...fork oil goes in the forks of an 2001 FXD and how do I do this ? Do you have any diagrams to help me with ? I have no diagrams for you. MAke your own as you take it apart etc and take lots of cell ...
...FORK OIL Replace front fork oil at every 20,000 mile (32,000 km) service interval and/or prior to storage. ALL BUT FXDX & FXDXT models Raise and support the motorcycle so the front end is off the ...
Question about Suzuki DR-Z 400 SM Motorcycles
...fork oil level after replacing seals Here is a manual for your bike....search for English parts of it..... http://safemanuals.com/user-guide-instructions-owner-manual/HUSQVARNA/CR%20125-_M The manual ...
...Fork Oil Requirements FORK MODEL TYPE and AMOUNT in OZ. ML IN. MM Left FORK - All models except Road KingCartridge10.0 oz 295ML 4.21INCH 107mm Road King Conventional 11.1oz 328ml 5.24inch 133mm Right ...
Question about Suzuki DR-Z 400 SM Motorcycles
...fork oil do i put in each Hi there i have rebuilt my bike and now i need to know how much Fork oil goes into each fork so i dont destroy by putting to much or not enough . T hanks Ahead of time for ...
Question about Suzuki DR-Z 400 SM Motorcycles
...fork oil levels exact. there is a special tool that you set the oil level in millimeters and it sucks out the oil to the right level, but before you do that step after adding the oil always pull and ...
37 questions posted
Usually answered in minutes!
9 Questions
3 Questions