brakes. Check for leaks, particularly around the piston. I think that there was a ring of dirt built up around the piston and when you pushed the piston in the dirt rolled or ripped the pistons o-ring
...piston ring grooves. Sometimes they can be freed up by the mechanic manipulating them. Often they break when manipulated. It all depends on how badly they are stuck. If a piston is badly scored it ...
Question about Motorcycles
...piston ring ends must be filed a little... In addition it is important to ensure the piston ring grooves have been thoroughly cleaned of carbon and the rings fit well with a side play of 0.0015 inch. ...
Compression problems If its a 2 Stroke engine you need new rings on piston if its 4 Stroke you could have A valve stuck open it also could need rings on piston
...piston and ring area. Rings usually get stuck to the piston so there is not any compression. Pull the jug and more than likely there will be alloy from the piston transfered to the cylinder heard. ...
piston ring area and some heat. Then a wood stake and a mallet with a couple solid hits might unstick the rings. Of course, after that...the head, rings and probably the piston are all gonna be scrap!
NO COMPRESSION blown rings, bad piston/cylinder tolerance, valve stuck open, spark plugs loose, hole in piston. be more specific.
Question about Suzuki GSX-R 1000 Motorcycles
piston, the rings could be stuck and not have good compression. It should show 120 psi or more. Also can pull off the exhaust and look in the exhaust port to see the rings, piston, and cylinder walls.
I just parked my bike an I went back to start it and it wonteven crank ceased or your rings have gone an got stuck in your piston barrel
...bad or stuck to the piston add oil then recheck compression, if the compression raises the rings are worn or stuck. If it does not come up then you have a stuck valve. sounds like your oil pump is ...
70 questions posted
Usually answered in minutes!
59 Questions
54 Questions
46 Questions
25 Questions
23 Questions