...light is staying on it could be one of many things ,it could be a very cheap oil presure switch or something very expensive if it is an oil pump failure.start with doing an oil presure test . presure ...
...break to change them Front brake light switch is located next to the hand lever for the brake. Look underneath and you should see two wires attached to a little black box. This is the mirco ...
Question about Suzuki GSX-R 1000 Motorcycles
...break light won't light when I pull the break. I checked the kill switch. I have a kymco agility 50 and it won't start. It has no power what so ever, the starter won't turn over ...
Question about Suzuki GSX-R 1000 Motorcycles
...break apart enough to look at the pin and it makes no change to the light when pushing it in and out so I'm not real sure of what I'm doing I'll get a new switch tomorrow and put it in !!! Usually ...
Question about Motorcycles
...change brake control switch what could be causing this Tamesha, you may have to adjust brake switch button, so when the brake pedals arm is in the up position it is pushing button enough to break the ...
...light with pedal or lever im stumped. Use a multi meter to test operation and continuity from the switch backwards. Be methodical and logical and you will eventually find the break in the
...break light has failed change the bulb, if its not the bulb, check you have power to it from the live+ wire if you have check the switch, to check the switch disconnect the the two wirers at the plug ...
Question about Suzuki GSX-R 1000 Motorcycles
...break light filiment stay on with no difference when brake is applied. Not sure I understand your question.The tail light filiment goes on with lights and brake light filiment goes on when brake is ...
...change to a toggle switch ... I am presuming you are on a road bike. If you are on a kick start dirt bike - no battery, no lights, no brake lights even, and you have a magneto system, all you have to ...
Question about Harley Davidson Motorcycles
Change the light bulb It should have two filaments inside and one of them is broken there is a break pressure switch on the brake line with 2 wires plugged into it -- replace the switch and your brake
70 questions posted
Usually answered in minutes!
59 Questions
54 Questions
46 Questions
25 Questions
23 Questions