2003 Suzuki VL 250 Intruder LC "rear tire cupping" Questions

...a sticker on the frame or swing arm that tells you the recommended pressure. I run 35 psi front and 35 psi rear. It gives a firmer ride but you also benefit with less tire cupping and better

...and rear tire pressure. Regardless, I have found that running 35 pounds front and rear promotes even as well as longer tire wear. The ride may be harder but you also get less cupping on the

...tire pressure on the front and rear of a 1983 GL 1100 Aspencade The factory pressure is on a sticker on the frame by the side cover. If you run 35 PSI front and rear you will have less trouble with ...

...rear tire pressure 2004 vt1100 There is a sticker on the frame by the side covers that gives that gives you Honda's recomended tire pressure. I like to run a higher pressure 35-36 PSI front and rear. ...

...frame under the seat or around the side cover. I generally run about 35 pds front and rear, it keeps the tires from cupping and generally gives me longer tire life. It also stiffens up the ride a

...rear tire pressure. You will get a stiffer ride but you will also get more even wear (less cupping) and better cornering if you run a slightly higher pressure. 35 psi front and 35 psi rear works

...rear tire? If your Jackpot has a Dunlop Cruisemax on the front that's the problem. The first two Cruisemax's on the front of my Vegas had to be replaced at 6000 miles. The third tire was a Dunlop ...

...on the frame that recommends front and rear pressure for your motorcycle. I like to run about 35 psi front and rear . It provides less cupping wear on the tires and a smoother roll into

can you raise the rear tire and replicate the vibe with the wheel spinning? Check your front wheel balance. You may have lost a balance weight of the wheel rim. Have you hit a kerb recently or pothole