...2 dynojet kit, K&N air filters. Aftermarket pipes. Had issues before installing these items also, bike runs great stop light to stop light but drops a cylinder at cruising speed. One stopped and idle ...
...for (cdi) typeTID 03-01 or can it be fix can you help me only 2 cylinders works or this is F enyone can tell me a 1977 D type is good? thank you very much Check out XJBikes.com prolly find it
...2 reasons, Your Manifold Carb Coupler (Rubber Boot) is loose and your getting to much air in so its sucking it from the cylinder, thats where your getting some oil, and its probably back firing, the ...
Question about Suzuki RM 125 Motorcycles
...2 go, any ideas?? Compression leakdown test should be done first to determine if it has a valve wear problem which is the most common cause of your problem. Oil in the airbox boot is most commonly ...
cylinder wall. try this. at the bottom of the carb is a fuel screw(small standard flat head screw) turn it all the way closed, then back it out 2 full turns, that should give you proper mix, right now
2. Throttle plate idle-stop adjuster has shifted. 3. Throttle plate shaft cracked-broken-faulty o-rings. 4. Throttle body to cylinder head seals/gaskets leaking. 5. Throttle cables improperly adjusted
440 questions posted
Usually answered in minutes!
42 Questions
35 Questions
1 Questions
2 Questions