2002 Suzuki VL 1500 Intruder LC "motorcycles piston rings" Questions

Ad

Question about Suzuki VL 1500 Intruder LC Motorcycles

1 Answer

my 2002 suzuki intruder 1500vl is backfiring on the back cylnder y is that This could be any number of things. First consider the most obvious. Change the rear spark plug. Then check the compression ...

Ad

Question about Suzuki VL 1500 Intruder LC Motorcycles

1 Answer

...master or slave cylinder , replace the o-rings in the slave cylinder piston and rebuild the master cylinder. A master cylinder kit and slave cylinder o-rings are available at your local Honda

Ad

Question about Suzuki VL 1500 Intruder LC Motorcycles

1 Answer

...piston and ring wear. Remove the spark plugs and pour a tablespoon (5 cc) of clean engine oil or spray fogging oil into each cylinder. Be sure to switch off the fuel before you crank the engine or ...

...piston rings on, a good trick is to carefully slide them over a couple of very thin feeler gauges. This way you don't over stretch them as they are very hard and very brittle.

To get the ...

Question about Suzuki VL 1500 Intruder LC Motorcycles

2 Answers

...piston rings without breaking them? WHAT DO YOU MEAN BUDDY PUTTING THEM ON PISTON OR PUTTING THEM IN BARREL IF THE RINGS ARE THE RIGHT ONES YOU SHOULDNT HAVE ANY PROBLEMS. INSERT ONE END OF THE RING ...

Question about Suzuki VL 1500 Intruder LC Motorcycles

1 Answer

...piston did you use new rings or the old ones --maximum rin gap is .025" rings don't wear in , just wear out why did you replace the cylinder in the first place was it because of low compression or ...

piston rings without shortblock Hi,if ive needed piston rings in the past thay ask make and modal and thay sell you them,or you could go to a enginering ferm with one of your pistons so thay can match

Question about Suzuki VL 1500 Intruder LC Motorcycles

1 Answer

...piston and compress rings with fingers and finesse cylinder over piston. do not force. put nuts on studs and tighten to spec in service manual. install head gasket correctly and put head on and put ...

Question about Suzuki VL 1500 Intruder LC Motorcycles

1 Answer

piston rings just bought new piston rings,how easy r they to fit in to bore thanks gareth THE BIKE I GOT IS A SP 125CC 2 STROKE First, be sure they actually do fit the bore. Take a ring and insert it ...

Question about Suzuki VL 1500 Intruder LC Motorcycles

1 Answer

...piston and rings on a yz125 2002 If you have never stripped down an engine get expert help .Piston rings are very fragile and can be snapped very easily .They also fit in there correct place on the ...

Not finding what you are looking for?
2002 Suzuki VL 1500 Intruder LC Logo

121 questions posted

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5971 Answers

ROB

Level 3 Expert

858 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...