...hydraulic. The cable, is it on the left hand? This is a clutch cable. i suppose that makes no difference in the installation, though, so here goes: There is a bolt with a nut on the bottom of it in ...
...adjustment?? If so, how (can't find the brake fluid resevoir...) Thanks guys. Make sure it isn't a cable acutated disk brake. If it is, it is possible to adjust some slack into it. If the ...
...slide your clutch actuator rod out and check it for straightness and undue wear. Lightly oil it and put it back in. Step six: Put it all back together, remove the clamp. Step seven: Bleed your clutch ...
...slide the primary cover in place while turning the clutch release screw into the the release mechanism. Install the bolts that hold the primary cover on and tighten. Tighten small primary cover bolts ...
slide out your fork tubes. At this point, you should be able to loosen the clamp on the bottom (and top) of the steering tube--as if you were going to change out your steering bearings--and muscle the
13 questions posted
Usually answered in minutes!
14 Questions
13 Questions
9 Questions
7 Questions
7 Questions