...valves. thank you. between .002-.004 intake and .006-.008 exh the settings for a 350 warrior 2001 is : 3000ths intake, 5000ths. exhaust I am looking valve clearence spec.s on a 2005 yamaha 350
Question about kawasaki ZX-7R Motorcycles
...valve clearence but dosent tell you how. side note: is there anything (like any settings) to boost the proformance of this bike?? you use a set of feeler guages to measure the gap between the valve ...
How to adjust valves. The intake valves set at .006 plus or minus .001 The exhaust valves set at .008 plus or minus .001 Remove the rectangular valve access covers at the top front and top rear of the
Question about kawasaki ZX-7R Motorcycles
...valve adjustment settings anywhere? Any answeres Hi, the points gap is 14 to 16 Thou. Inlet valves 4 thou, exhaust valves 6 thou. I dont know the settings in metric, so using a set of imperial feeler ...
how to set valves my email is [email protected] thanks i have had two of these bikes before,and had one set at macleans sports in fredericton. they set them to tight and burned them up. so ...
valve settings example 0.006 in or 0.008 in etc Inlet .0024 (two and a half thou.) Exhaust .006" (six thou.) (6) Set the valves: Set the valves on the cylinder on the COMPRESSION stroke. Put the wring
DO YOU SET VALVES OR CAM LOBE ON GSXR 750J 1988 Not sure exactly what you mean .. On older Suzuki's you set the valve clearance with the valve lobe pointing directly up on compression stroke (lobe has
need help with valve adjustment specs need to adjust valves on my rm-z 250. never did this before.do you know the specs for adjustment? Exhaust power valve adjustment for "stock setting" is: 1/2 turn ...
Question about Motorcycles
i needed gap setting for a hnda over head cam gcv 160 5.5 h/p [valves setting ] SIR I WOULD APPEATE IF YOU HELP ME. I NEEDED SETTING FOR THE VALVES. ON MY HONDA OVER HEAD CAM GCV 160 5.5 H.P . THAT ...
im having problem with my kawasaki rouser,when im starting thers is no movement of the starter thers only a sound of the relay, do u think the relay is broken? Hi. I believe the selonoid on the ...
14 questions posted
Usually answered in minutes!
25 Questions
13 Questions
10 Questions
8 Questions
9 Questions