Question about kawasaki KX 125 Motorcycles
wont start by kick start but will by pull start my 2003 kx 125 wont start unless u pull start it. but it dies unless u keep the revs up about half throttle. the reed valve is good, air cleaner good, ...
wont start, seems like it ran out of gas or fouled a plug. i clean the plug it starts for a second then bogs out and wont start again clean your carburator, and if possible do a compression check, how
...wont start. It started for a few seconds but the second you gave it any gas it bogged and died. Now it wont start. What might it be? change the plug then drain the carb and ck compression and that ...
Question about kawasaki KX 125 Motorcycles
got compression, got spark, getting gas wont start why wont this bike start clean carb and check jets i have a 1984 honda 110 if some one can help me with the timing let me know
...wont start was going great just stopped,can kickstart all day will not go just makes a puff noise,please help wont 2 ride again ,cheers tankman1 sounds like the rings are fried and needs a new piston ...
...wont kick start or idle , it will coast 2003 kawasaki 125 two stroke engine. Bike wont kick start or idle , it will coast start.Engine was completely rebuilt this spring and has only a few running ...
Question about kawasaki KX 125 Motorcycles
start only when i catch it in gear but doesnt run strong and wont stay idiling.. Steve have you checked the reeds inside the induction side if they are corroded from sitting it will cause that problem
Question about kawasaki KX 125 Motorcycles
...2000 model that wont kick start, but crash starts? it revs ok when going but lacks the power when i throttle on going up hills hmm thats unusual have you ever changed the piston buddy get back to ...
...just had engine rebuilt but now it wont kick start or idle. It will coast start and then seems to run fine . Changed plug and air filter is clean . Any ideas ? sounds like you need to rejet the
my 2001 kx85 wont idle or kick start but will bump start ur batt is failin-test it for 12v hold--voltage regulator may be at fault also
326 questions posted
Usually answered in minutes!
29 Questions
21 Questions
7 Questions
6 Questions