1995 kawasaki ZZR 1100 "nothing happens pressing starter bike" Questions

nothing happens, lights dont even dim or flicker when starter button pressed, There are two safety switches that you may need to test. 1) Neutral safety switch- this switch is what tells the bike that

...happens i.e. a small click or a bunch of clicks or a large click or Nothing. If you take the small connector off at the starter is there any voltage there when you press the start button. If so how ...

...nothing happens? If you hear a click or it try's to start but doesn't turn over. If nothing at all happens when you hit the start switch then you most likely have an electrical issue, versus if you ...

...nothing happens. Deadly silence? Usually on first turn of the key there is a gurgle/wuring but this isn't happening now? Is this the bike priming itself? It could be the link from the starter button ...

nothing happens except the headlight goes dim even when the battery is fully charged. I've heard that the starters are notorious. Yes, the starter clutches sometimes get stuck on those bikes. Then the

...nothing happens. I rigged up a wire from the starter to the battery to get it started so the starter functions. I heard the problem might be a ''relay switch''. VERY WELL COULD BE. FIND THE STARTER ...

...starter and nothing other than a faint click. Has happened once before at a rest stop after a long ride. On that occasion bike started after about a half hour. This time the bike is cold - I just ...

...Nothing happens when I press start button. No click. Nadda. Ignition? starter? Or am I way off base? Thank you! I would have the bbattery tested, bike batteries are prone to just going oopen and u ...

...test light in all connections and get light... tried to jump the solenoid and nothing happens ... please help hook 12v to the starter side of relay to see if starter will spin,if so your relay is ...

...work the bike appears to be stuck in gear also, if you press the starter button nothing happens even with the clutch pulled check if it has a stand micro switch that is faulty check for bad ...