2007 Honda CBR 1000 RR Fireblade "lb" Questions

...torque for small nuts and bolts: Torque Specifications of Small Screws Screw Size/Torque (in.-lb) 2mm 5-7 2-56 6-8 2.5mm 8-10 4-40 10-12 5-40 11-13 3mm 12-14 6-32 15-17 4mm 18-21 8-32 19-23 5mm ...

...specifications According to the Service Manual, the Front Axle Bolt should be torqued to 16 ft.lb for the pinch bolts 58 ft.lb for the front axle and in case you need it... 33 ft.lb for front ...

...cylinder and head bolts on a 2001 kx 250? The torque specs for your cylinder base nuts are 25ft.-lb.and the head flange nuts at 18ft.-lb.tighten them in criss cross pattern,at three different ...

...oil capacity should be 10.9 oz in the left, and 10.8 oz right. Lower pinch bolt torque is 40 ft-lb and upper is 8 ft-lb. The steering stem nut is 72 ft-lb and the steering stem adjustment nut is ...

...bolt torque spec for a mercedes 190sl? It's supposed to be done in stages: Stage 1 -> 4 mkp (29 lb/ft) - engine cold Stage 2 -> 6 mkp (43 lb/ft) - engine cold Stage 3 -> 8 mkp (58 lb/ft) - ...

need to know the correct rear wheel axle torque specs, called two different shops and got two different answers; 47 lb-ft and 72.5 lb-ft. Service manual says 72.5 lb-ft

cyl head torque First setting is 20Nm (14.4ft-lb)Final setting is 51Nm (38ft-lb) for the 11mm bolts and 39Nm (29ft-lb) for the 10mm bolts...

head bolt torque settings for kawasaki zzr 1100 First torque to 20Nm (14.5ft-lb)Then 51Nm (38ft-lb) for the 11mm bolts  (outer 4) and 39Nm (29ft-lb) for the 10mm bolts (centre 6)

...and need to know how much to tighten the head bolts thanks danny Auto Decompressor Bolt 104 in·lb Cylinder Head Cover Bolts 87 in·lb Cylinder Head Bolts: M10 36 S M6 104 in·lb ...

how lbs. torque is necesary for top end? for kxf 250 05 Torque - 10 mm Cylinder Head Bolt : 49 N·m (5.0 kgf·m, 36 ft·lb) Torque - 6 mm Cylinder Bolt : 12 N·m (1.2 kgf·m, 104 ...