2004 Honda CBR 1000 RR Fireblade "replacing timing chain tensioner" Questions

Ad

...timing chain broke? I've adjusted the cams twice so far. I cannot get the timing right. Question edited for clarity and add maker. Question moved to model category. Do it once and do it right. It ...

Ad

Question about Honda CBR 1000 RR Fireblade Motorcycles

2 Answers

...tensioner or clutch. I took the engine out from frame, removed oil pan and it appears that oil pump chain has really lot of free play, it can touch the edges. I did not find chainlock from chain, it ...

Ad

Question about Honda CBR 1000 RR Fireblade Motorcycles

2 Answers

...timing chain on z650 To adjust the cam chain tensioner: disconnect the negative lead to the battery, remove the ignition cover plate on the right side of the engine, using the 17MM bolt rotate the ...

timing chain There are two cam drive chains. They rarely need replacing. There is a tensioner device on each cylinder to adjust the tension in the chains. All of the tensioner devices are different so

Question about Honda CBR 1000 RR Fireblade Motorcycles

1 Answer

...How do I adjust the tension on my cam timing chain Yamana1980-XJ650 Maxim in line 4 cyl. replace. and when you replace, also replace gears, as a new chain will eat up the old gears, and

Question about Honda CBR 1000 RR Fireblade Motorcycles

2 Answers

...some feedback, thanks DO NOT just replace the tensioners without setting the cam timing as not doing so will let the cam chain jump the crank sprocket. And refit manual tensioners, as Honda ones

...timing chain adjuster work? My motor is a little noisy and I was looking to tighten my timing chain. The manual doesnt tell me how to just adjust it. It tells me how to assemble it (not very well ...

Question about Honda CBR 1000 RR Fireblade Motorcycles

1 Answer

...timing chain The timing chain should be self adjusting, spring tension takes up the slack as the chain wears. If your timing chain is noisy, or rattling, then it is worn out and needs to be

Question about Honda CBR 1000 RR Fireblade Motorcycles

1 Answer

...timing chain how does the tensioner operate Depending of the bike , the tensioner should be a Teflon push plate or a metal plate which pushes on the chain to reduce the slack in the chain .Adjustment ...

Question about Honda CBR 1000 RR Fireblade Motorcycles

2 Answers

...Replacing the timing chains involve splitting the crankcase, and would only be done when the entire motor gets a rebuild. The timing chain has plastic tensioners that rub against it to keep it tight. ...

Not finding what you are looking for?
2004 Honda CBR 1000 RR Fireblade Logo

98 questions posted

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...