2004 Honda CBR 1000 RR Fireblade "chain adjustment" Questions

Honda CBR 1000 -87 slacky oil pump chain Some time ago I tried to find out what could cause rattling noise when engine idling, I was told to suspect camchain/tensioner or clutch. I took the engine out

...the famous ticking noise from the engine but mine ticks louder. i dont thinking thats the timing chain. ant suggestion? If it isn't the cam chain then it is most likely a ticking valve tappet.

2006 Honda CBR-1000. How do I set timing after timing chain broke? I've adjusted the cams twice so far. I cannot get the timing right. Question edited for clarity and add maker. Question moved to ...

...explaining wrong but it has to do with gear an space this is the best way i can explain.. I would check the chain adjustment.If its in specs you may be going to slow in 2nd gear.Hope this helps you

...to hold the rear brake on loosen the sprocket bolt undo the rear wheel axle nut and loosen the chain adjusters to put some slack in the chain then remove the front sprocket and fit the new one

...adjusted, roll the wheel a couple of turns and check the adjustment of the chain again. Once finished, tighten adjuster lock nuts and retorque the axle nut to 50 foot pounds of torque. Good Luck, ...

...chain's tension. Turn the adjustment bolts clockwise to loosen the chain, or counterclockwise to tighten the chain. Check that the edge of both chain adjuster blocks are evenly aligned with the ...

...adjusted and properly tightened, your chain should be checked weekly until you see no difference in the 3/4 inch. After that you should check the adjustment monthly throughout the life of the

How do I tighten the primary chain tentioner on my Harley Davidson Dyna wideglide inside the primary cover, in the middle bottom part of the chain is a shoe assembly, loosen adjusting bolt to raise ...

...reliability chain (longest endurance) for a bike that rides a lot of highway miles. I described chain adjustment on my bike