2002 Harley Davidson FXDL Dyna Low Rider "adjusting shocks" Questions

adjusting twin cam back shocks the best setting There is no single "best setting". It depends on you and your riding style. Heavier riders sometimes need a stiffer suspension. Same goes with those ...

...tighten the shocks up by adjusting the ring at the bottom of the spring. Turning the ring increases or decreases the preload on the spings depending on which way you turn the ring. Good Luck ...

bike has recently started to wobble at speeds around 70mph. Any ideas what it may be. I first noticed the wobble when going around a curve at about 80mph. Today I was going straight on a good road and

...Adjustments Progressive Shock Adjustments Here is one YouTube video on adjusting MC shocks. If this isn't the right model, check YouTube for your model. There are more videos on adjusting

i HAVE A NEW 2011 HERITAGE SOFTTAIL AND WISH TO ADJUST THE REAR SHOCK BUT CANNOT LOCATE THE ADJUSTER The adjusters are on the shocks that are underneath the bike. There are two adjustments. One is a ...

adjusting shocks 2004 fatboy To remove lift rear tire slightly off the ground then remove the shock attaching bolt and washer with a special Snap-On adapter PN SRES24 and then remove the ****** ...

Vulcan 800A (not Classic) Can you adjust the rear shock? Can you adjust the rear shock for heavier load/taller stance? There is a shock company that makes progressive shocks for your bike. That is ...

how do i adjust the hear shocks for pillian weight? This is directly from the 2008 VRSC Service Manual: Make sure both shocks have the same preload. The average weight solo rider might use the ...

adjust rear shocks on a 04 To adjust the shocks loosen the locknuts and turn the adjuster plates OUT towards the locknut to increase the spring preload for a heavier load or IN away from the locknut ...

2000 honda shadow sabre shock adjusted too far. I meant to adjust my rear shocks up to position 5 for 2 up ride. Went to far and the mid section of the shock collapsed. It seems to maintain resistance