Question about Ducati Monster S4 Motorcycles
...a ducati monster s4 need to know the torque specs for the dry clutch The torque spec for a chutch nut on a 900 is 180-190Nm (136 ft. lb.) The torque spec for the clutch housing bolts (presure
suzuki dr 125 my rear wheel nut came loose and fell off. it's the feft hand side does anyone know the nut size or spindle size as i'm not able to get to measure it Don't worry about the metric size. ...
I don't have one - I am fixing a problem and need a drawing/spec sheet w/torque specs for motor hub nut and clutch hub nut and are these two hub nuts right or left hand thread. Regrettfully, you ...
Tork specs for clutch 71 sportster XL The clutch hub nut, the large nut holding the inner and outer clutch hubs on, torques to 110-150 foot pounds. The mainshaft nut that holds the front final drive ...
Question about Ducati Monster S4 Motorcycles
What are the torque specs for the head bolts on my 2001 V92C? 10mm nuts are 40 foot pounds. 8mm nuts are 18 foot pounds. You need to torque all the nuts to 10 foot pounds to start, then torque the ...
UNCOOPERATIVE AXLE NUT I noticed that the drive chain on my 2003 cb250 nighthawk was slacked, so I went to tighten it up. However, I could not even perform the first step, as the axle nut is not ...
Question about Ducati Monster S4 Motorcycles
...with passenger on bike in second gear knocking clattering sound from Sound like a loose Compensator nut. The compensator nut is the part (the nut) that attaches the front sprocket to the motor crank. ...
...follow the clutch cable down till you come to a rubber boot slide the boot up loosen the 9/16 jam nut and 1/2 nut then go down and remove clutch cover there is a 11/16 nut and an allen bolt hold
exhaust front pipe nuts rusted on need to renew front pipe however the nut on the studs that hold this part to the engine have rusted so bad that we cant undo how do you get a socket / spanner on the ...
...so it doesn't pull when the hadlebars are moved? On the connection to the throttle there are two nuts. One long. The other short. The short one is the lock nut. Loosen the lock nut all the way ...
10 questions posted
Usually answered in minutes!
12 Questions
2 Questions