...for 2013 road glide twin cam motor cases 1st torque Crankcase screws to 120 in-lbs (thirteen point six Nm )in proper sequence then loosen and re-tighten to final torque of 15-19 ft-lbs 20.3-25.8 ...
...arm I assume you're working on an Evolution or a Twin Cam and you're talking about the torque specs on the lower plate. 5/16" bolts 15-18 foot pounds 1/4" bolts 10-13 foot pounds Hope this helps ...
Question about Harley Davidson FLTR-FLTRI Road Glide Motorcycles
...any sealer used with o-ring on bottom of jugs for a 2001 twin cam torque those bolts in a cross pattern in 5 lb increments to 40 lbs. carefully, dont forget to oil the bolts first. No sealer is ...
Twin Cam, Torque the compensator sprocket (engine nut) to 150-165 Foot pounds. Put two lines of Loctite #271 (red) in the nut. The mainshaft nut inside the clutch torques to 70-80 foot pounds with one
Question about Harley Davidson FLTR-FLTRI Road Glide Motorcycles
...that the twin cam is about the same way but I would look a little on the internet to see what I could find. Go here for your information. ...
Question about Harley Davidson FLTR-FLTRI Road Glide Motorcycles
...to speak to me ...
Question about Harley Davidson Motorcycles
......
Question about Harley Davidson FLTR-FLTRI Road Glide Motorcycles
...Twin-Cam-88.html https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc https://serviceinfo.harley-davidson.com/sip/service/document/6300 https://www.6ya.com/how-6ya-works to speak ...
Question about Harley Davidson FLTR-FLTRI Road Glide Motorcycles
...twin cam 88? Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners ...
57 questions posted
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
456 Questions