2000 Harley Davidson FLSTC Heritage Softail Classic "install rear brake pads" Questions

...Rear Brake Pad Install Harley Davidson Forums http://www.harley-davidson.com/app-content/service/isheets/-J03708.PDF ...

...rear brake back on the bike should not be a problem. The brake caliper bracket should act as the wheel spacer on the right side of the bike and must be properly positioned in order to get the axle ...

...Install the two bolts and torque to proper specs, about 20 foot pounds or so. Slowly depress the rear brake pedal and let off until you get a good firm pedal. You may have to do this several times. ...

...Rear Brake Pad Install Harley Davidson Forums http://www.harley-davidson.com/app-content/service/isheets/-J03708.PDF ...

...install a new tire.... The hard way: place bike on bike jack and remove rear wheel by removing the axle nut and drifting the axle out of the wheel. Derail the belt/chain and drop the wheel out of the ...

...rear of the motorcycle, install the new pad and install but do not tighten the pad pins, then pump the rear brake pedal to move the inside pistons out until they they contact the inside brake pad, ...

...install new pads.... Remove the old brake pads...Coat the brake pad pins and the new brake pads metal back plates with high-temperature grease. Slip the new brake pads into the rear brake caliper, ...

...rear caliper. Install new inside brake pad using the same orientation as the pad previously removed. Curved portion of pad must face upward. Install pad pins until the pins snap into place with an ...

...rear caliper. Fifthly install the new inside brake pad using the same orientation as the pad previously removed (with the curved portion of the pad facing the rear of the motorcycle. Sixthly install ...

...rear caliper. Fifthly install the new inside brake pad using the same orientation as the pad previously removed (with the curved portion of the pad facing the rear of the motorcycle. Sixthly install ...