1979 Harley Davidson XLH 1000 Sportster "dynamo wiring" Questions

...to rebuild the generator? Hi, I own a 1976 XLCH1000 and had a similar problem some years ago. The dynamo must be energized correctly as if not it wouldn't work. Disconnect the two wire on the

...on primary or timing side. how do you remove the primary cover. you do not need to open the cover/dynamo yet,and donot replace the light coil yet.Letting you know,a motorcycle have 3 lines,the ...

...etc...... cheers John where doyou think the electrical source is came from..,in the batery or dynamo/?IF YOU THINK in the dynamo,then you check the coil or magnetic wire if it is

wiring loom new brushes rectifier and voltage regulator. The dynamo delivers 14V up to excactly 4000 rpm no charging over 4000rpm at all Do i need to change to rotor in the dynamo ?More likely: a) one

...it is possible that the winding orr the rectifier is faulty. You will need to open the alternator/dynamo unit. However If voltage is present then check the HT coil for

wiring harness was ripped out of it. i have trie alot of stuff and i cant get a spark. i have even put a battery charger to the wire on the the coil. the wire to the spark plug has no power. how can i

...12V. But to make it sure first. Please use your DC volt meter to check output of your alternator / dynamo. Other wise just remove battery terminal then use bulb 12V DC connected to the wires and ...

...your bike take off positive battery..See if motor stop if yes Your Diode as to be chage inside Dynamo Magneto and it not

can i wire a voltage regulater and battery to run lights on my 1974 t 500? its currently running a magneto If you can fit an alternator or dynamo, yes of course you can.

wire generator You can't have a single wire generator. It needs an earth and a positive for a generator to work.If it only has one wire it is a dynamo. and you don't need a wiring diagram for one wire