...motorcycle..6 speed baker transmission Without clutch plates installed. The clutch basket inner is directly connected to the tranny input shaft- if you turn the inner clutch basket while in gear it ...
...check you have free play on this cable,, put the bike on its center stand and spin the rear wheel with the bike in gear holding the cluch in as you spin the wheel if it spins ok the cluch is letting ...
...rear wheel and spin the rear wheel if its binding up the brakes are sticking on if so get a short leaver and jentely pull the pads away from the disk (rotor) until there fully in the calaber them ...
Question about Yamaha Motorcycles
...the bike was on the stand the front wheel, hadn't turned while the rear one was spinning with the engine revved... the solution was simpler... SPIN THE FRONT WHEEL, Or take the bike for a ride. ...
Question about Titan Gecko RM Motorcycles
...REAR STAND, WITH THE FRONT WHEEL STIL ON THE GROUND, UNDO THE 2X 6mm ALUN KEY PINCH BOLTS ON THE R,HAND FORK, NOW INSERT A SUITIBLE KEY INTO THE SPINDLE AND CRACK OF THE SPINDLE IN AN ANTICLOCKWISE ...
...no for long. is there anythink i can try , im gonna check the rear wheel if that spins nicely. thanks. Check calipers and seals clean and free the brake pistons if any seals are pinching replace ...
engine seems to rattle a bit more as well. remove the chain and check all links are free , check the rear wheel bearings are spinning free and not notchi ! check condition of sprockets teeth not worn
...rear wheel by hand (off the ground) will tell you quick enough. If it's hydraulic you may have to get into removing the caliper, prying the rubber boot back, injecting some WD40 and working it free. ...
...rear brake pads ducati sport 1000 HI FIRST YOU WILL NEED TO PLACE THE MACHINE ON A SUITABLE STAND SO THE WHEEL SPINS FREELY, THIS OPERATION IS BEST DONE FIRST SO YOU KNOW WHEN YOU HAVE COMPLETED THE ...
11 questions posted
Usually answered in minutes!
4 Questions
5 Questions
0 Questions
1 Questions
1 Questions
