1979 Suzuki Gs 550 L "head worms" Questions

...know in respect of the securing screws when you say they have been stripped, do you mean the screw heads no longer suitable for a screwdriver or wrench? If so this can be easily removed using a

...primary cover right below the middle of the clutch inspection (derby) cover. It is a 5/8 inch hex head ...

where is the oil drain plug for 2002 road king There are three oils. You do not say which one. Dyna engine oil is on the left side bottom of the oil pan near where the jiffy stand rests when up and ...

worms up the RPM go higher. I cleaned the caburators by the manual, thought they may be dirty or sort of. but everything seemed O.K. Put them back and the same problem. The fuel / air mixture is lean.

...are only four screws holding the carbs on via four thin duabley type clips, You will need a long X-head or a Phillips for this, You will need an 7 or 8mm socket and a 10mm socket for the tank and an ...

harley torque specs exhaust torque Tighten the top nut of the front cylinder head exhaust ****** to 9-18 in-lbs (1-2 Nm), then tighten the bottom nut to 100-120 in-lbs (11.3-13.6 Nm), final tighten ...