NEC Electra Elite DTU 16D-2 Corded Phone "phone dnd light" Questions

Ad

Question about Panasonic Lands Phones

2 Answers

...the phone will not ring. Press the FWD/DND button to change the phone status to the following. Blinking red light means FWD(Forwarding) is active and no light means neither FWD nor DND is

Ad

Question about Panasonic Lands Phones

1 Answer

...DND and FWD are both set it shows 3 states). At the phone, press intercom and dial *710x where x=2 for all calls, 3 for busy, 4 for no answer or 5 for busy/no answer plus the extension of the voice ...

Ad

Question about Panasonic Lands Phones

1 Answer

phone on DND? How do I put my phone on Do Not Disturb. When I press the DND button, nothing happens. You get a chance for that to work next time :-) Panasonic features are in the system, not the phone

Question about Panasonic Lands Phones

1 Answer

...7101 it should turn on Do Not Disturb (7100 cancels).  In DND, the FWD light should flash.  Once you have set these two conditions up, the FWD/DND button has 3 states, FWD, DND, and ...

...BACK IN THE PHONE THEN PLUG THE BASE BACK IN THE WALL. THE DND WILL THEN TURN OFF! JUST DID IT 5 MINUTES AGO (11/8/08) Stuck DND light on base? Key in *73 from phone. That will end the DND

Question about Panasonic Lands Phones

1 Answer

DND on my KT-X7331 desk phone Typically this is controlled by the status of the FWD/DND button and indicated by the button light. button light off: Forward and Do Not Disturb off button light blinking

Question about Panasonic Lands Phones

1 Answer

...DND button on an idle phone? In most systems, it's supposed to toggle between FWD DND and OFF after you press it more than once. If that doesn't work, try pressing FWD STORE 0 STORE. That should turn ...

Question about Panasonic Lands Phones

1 Answer

... you can set it to forward all calls via the 711 (vm ext) #. It will blink the FWD/DND button. As an aside, 7341# stops paging to the phone. 7340# brings it back. Again, these are TA-824 commands. ...

Question about Panasonic Lands Phones

1 Answer

Take the phone off do not disturb Try pressing the FWD/DND button and look at the display. It might have 3 steps, FWD, DND, and FWD/DND Off. When you reach the Off part, the light will go away. Carl

Question about Panasonic Lands Phones

1 Answer

DND button. There are three status conditions for this button indicated by the button light. button light off: both features off(Forwarding and Do Not Disturb) button light blinking red: Forwarding on

Not finding what you are looking for?
NEC Electra Elite DTU 16D-2 Corded Phone Logo

365 questions posted

Ask a Question

Usually answered in minutes!

Top NEC Lands Phones Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66967 Answers

Don A
Don A

Level 3 Expert

4499 Answers

RAJA NADEEM AKHTER
RAJA NADEEM AKHTER

Level 2 Expert

247 Answers

Are you a NEC Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...