1972 Ducati 350 Scrambler "cam lobe top dead center" Questions

...cam lobe should be starting to rock on opening the intake valve on the down stroke of the pistion. Trun the engine over by hand to make sure no valves are knocking the piston. Should be as ...

top dead, install the cams. first the exhaust cam, with you facing the sprockets, with the cam lobes facing up and away, about the 10 o clock position. once set there, you should see a refrence on the

top dead center ? I'm lost from there When you install the cam have the cam lobes down in 5 o-clock and 7 o-clock position or close to it,and the cam sprocket bolts should be level with gasket service

...the head on my 2012 Bahama VIP 50cc scooter. How do I set the timing so it will start If 4 stroke, get to top dead center, and make sure cam lobes are Veeing up wards. should be straight

...cam followers. The lobes themselves will kind of point up and away from the cylinder head. Also there should be marks on the cams they need to be level with the top of the cylinder head. You will ...

...top of the compression stroke and the cam lobes point up, this is also a good time to check valve clerance. to set timing rotate the motor slowlly untill a notch is visible in the window of the small ...

...engine so that the piston is at top dead center (TDC), verify by aligning the "T" mark on the flywheel. With the piston at TDC, insert the camshaft with the cam lobes facing down (all valves

...top dead center (TDC). Now position the camshaft so that the cam lobes are both facing downward. Align the two marks on the cam sprocket with the cylinder head cover gasket surface (making sure the ...

...Top Dead Center. The cam lobes should be pointing downward. There will be a mark or marks on the cam gear for alignment of the gear. If only one mark, it should be at the top and inline with the ...