...fuel pump on my xt660x will not prime when key is on, kill button in on position, stand is up, check engine light flashes while cranking, it simply stopped running after sitting at idle for approx 1 ...
Question about CCM 604 DS Supermoto Motorcycles
...FUEL PUMP? FUEL INJECTION,or CARBURETORS?Check Fuel Filter? Fuel pump relay?Fuse or circuit breaker? For the pump circuit? Does it have an electric fuel shut off switch, in the ignition circuit? How ...
Question about CCM 604 DS Supermoto Motorcycles
...fuel pump relay for a gsx 1400 51 reg as keep getting fault code c42 ,runs for a short time then cuts out,thanks c42 is the ignition switch signal, check the ignition switch. c41 is the fuel pump ...
Fuel pump randomly cuts out I have a 2003 Fireblade. It randomly cuts out on me when I am driving it or even when it is sitting in the driveway running. I hear the fuel priming pump come on a little ...
Question about CCM 604 DS Supermoto Motorcycles
...and when the fuel pump cycles and you push the start switch all power is cut. but when you turn switch to accessories power comes on every thing works Sounds like a bad switch to me. Good Luck ...
...fuel pump short cycles and wont start i have to on off start switch or ignition switch a few times to get it to start especially when its colld out i played with relays under the seat sometimes it ...
Question about CCM 604 DS Supermoto Motorcycles
fuel pump.After unit dies and you dont cut ignition switch of the bike will turn over only. Battery is on good shape. When unit stops running the lights do not cut off just the engine. 2002 carb. 1450
Question about CCM 604 DS Supermoto Motorcycles
...Fuel pump isn't coming on. I checked everything, cranks but no start. No power coming from fuse block to ignition. Cranks but no start. Fuel pump doesn't kick on. 03 CBR 954 Fireblade. If your 2003 ...
Question about CCM 604 DS Supermoto Motorcycles
...fuel pump. pump does work we tested it Is there a emergency cut off switch? There may be a 'kill' switch, check it and see if its ok. Get a 'live' wire to the pump (by pass) and thn try to start ...
19 questions posted
Usually answered in minutes!
5 Questions
12 Questions