NorStar M7310 Corded Phone "set prime line" Questions

...right arrow) til you see prime set press the show button(top right arrow) press the change key and enter in the new prime set extension press the next key ( lower right arrow) press the release ...

...do I set line 3 as automatic dial tone when the handle set is picked up? If you mean for line 3 to be selected when you pick up the handset, you need to program that as the "prime line" for that

set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344. The screen should say TERMINALS&SETS. The 4 top line

...an option like all the other phones are set up to do. Help! Check that you have pool access for your extension set to Y for pool A. Then check and change prime line which is down from line

Intercom button (outside line) doesn't light up when handset picked up. How do I program to get the dial tone upon picking up the handset? Set "prime line" to "intercom" in config.

...Prime Line' Press the change button to set the desired line that will activate when the handset is picked up. (It will probably display 'None' at present before change) Press enter and release. ...

...a call It's in system programming: feature CONFIG, Terminals & Sets, enter ext #, Prime Line: set to I/C (for intercom dial tone) or Line ***. It is probably set to None based on your

...PRIME LINE for a line pool access rather than intercom. -> Get into system programming -> get into TERMINALS&SETS and type in your extension -> enter LINE ACCESS and hit next till you find PRIME LINE ...

...prime line" or "Line preference" but not "ringing line preference". It is not usually on by default on a multi-line business phone system. Your system can do this but I suspect it's a system ...

...Line type=PoolB, Prime Ext=21, Aux ringer=Y Line Access for Ext 21: Line Assignment=Appear&Ring, Line Pool=PoolB On the cross connect do you have a CO connected to that line. That is most likely ...