Question about Pride Mobility Products Health & Beauty
...codes are pretty standard and are applicable to powerchairs only not scooters: 1 flash User Fault (do not touch joystick) and turn back on 2 flashes Battery Fault Recharge batteries or replace 3 Left ...
How do I reset fault code on a hoveround mpv4 Clear fault code N o t e : When there is a fault please follow this procedure : A . Switch off the control system. B . Make sure that all connectors on ...
...fault codes for otronic wheelchair controler I need the fault codes for a qtronic program on quickie wheelchair. You can look up the codes ...
Question about Health & Beauty
...fault codes on this 600 ES jazzy. You can reset or clear the code by turning the chair off and back on. If the error remains you can use a dealer hand held programmer to read and determine the fault ...
...fault codes for the flashing lights. Repost with more info re: the fault codes. Good Luck. http://www.pridemobility.com/pdf/Owners_Manuals/US_Jazzy/US_Jazzy_1143_om.pdf Also, make sure the charger is ...
...hand held programmer available to dealers and certified technicians. The number and type of fault codes logged in the controller is another indicator of which component(s) has failed. Hope this
...codes. 1 red = low batt., 2 red = left motor disconnected, 3 red = Left motor wiring fault, 4 yellow = Right motor disconnected, 5 yellow = right motor wiring fault, 6 yellow = Inhibit active, 7 ...
Question about Pride Health & Beauty
...plugged in properly. The code says that the wiring to the right motor or the right motor itself is bad. The fault codes aren't always right and it could be a problem in the joystick controller
codes: 1. Stall Timeout, Joystic out of neutral 2. Battery Voltage too over 32VDC hi or too low under 17VDC 3. Left motor Fault 4. Right Motor Fault 5. Left Brake Motor fault 6. Right Brak Motor fault
300 questions posted
Usually answered in minutes!
9 Questions
5 Questions
6 Questions
4 Questions
