I have a Tork 1101. I am confused by wiring diagram. Please help. http://waterheatertimer.org/Tork-timers-and-manuals.html#1101 1) Tork 1101 has 120Volt clock motor, making this 120Volt timer. 2) ...
Question about TORK Hardware & Accessories
...1101 is 120V timer. 120V Black Hot wire from circuit breaker connects to Pole L There is a brass bridge that connects Pole L and Pole 1 >> if this is missing, put a jumper wire that connects ...
...wired correctly and has 120 v but the actual clock isn't rotating If timer worked before, then clock motor has gone bad, or wires going to clock are not connected to terminals L and X. ...
hello can i get the instuctions for tork timer model 1191 please? According to Intermatic conversion chart, Tork 1191 is same as Tork 1101. Link to 1101 .pdf Link to Tork manuals Tork 1101 is ...
lights of a store for a dozen years or so. Do I need to rewire it? Thanks. yes On my Tork 1101, the off switch was sticking and stopped the motor which then ran in reverse. Turning the power to it off
...1101 is 120V timer I think you have your Load wires and Wires from breaker reversed? Black Hot wire from breaker goes on Terminal L There is brass bridge between terminal L and terminal 1 If this ...
lights on at syncronized time...anybody?help? Open following link to identify Tork timer http://waterheatertimer.org/Tork-timers-and-manuals.html#1101 Add a comment and include photo of your timer and
Question about TORK Hardware & Accessories
...wired many ways. T1103 has 240V clock motor. http://waterheatertimer.org/Tork-timers-and-manuals.html#1101 You are connecting 240Volt pool pump to timer. Open link below and see wiring diagram: look ...
Question about Intermatic Hardware & Accessories
lights are wired, there is either one cable or two coming into the timer. If there is one, connect the hot to the 2 terminal, connect the white to the incoming white and the pigtail connected to the x
...1101 timer will not trip on. It trips off ok. Manual override works fine, trip pins fine. When I manually rotate the dial it trips off fine, i hear and feel it click when the on pin pass, but the ...
41 questions posted
Usually answered in minutes!
18 Questions
8 Questions
4 Questions