Leviton COMBINATION SINGLE POLE TOGGLE SWITCH "wiring 5224" Questions

wiring diagram for combination double switch 5224-2t This might help.

On the combination Two Switches #5224 do I break On the combination Two Switches #5224 do I break the tab to permit it to operate two units separately. Are the white wires attached? No need to break ...

...5224 switch using (1) white wire and (3) black ones and it popped the breaker. I switched the wires and now both toggle switches control same light. The previous switch controlled a light and a ...

...5224 switch? First, turn off the power to this circuit to avoid getting a shock. If the two devices that are controlled by the combination switch are lights, you will want to join the two (2) white ...

I have a 12/2 w ground source. I want to use a Leviton 5224 combination switch to control a double plug. The top swithch for the top plug and the bottom switch for the bottom plug. I will use 12/3 ...

5224 Combination two switches to light two different fixtures (an exterior light) and it will only turn off and on by 2nd switch being switched on or off (the interior ceiling light) Hooked each brass

want to install a duplex switch in a double gang box that currently has a receptical and a single switch. The existing single switch is wired in a switch loop and operates a switched receptacle. I ...

2toggle switch--2wires each side ground --wheniput in new switch-- both lights work off one toggle--nothing on other toggle--instruction tlks of breaking off fin but doesnt look like my setup--ihave 4

IN THE OLD DOUBLE SWITCH I REPLACED WITH THE 5224, SWITCH 1 WOULD TURN ON LIGHT 1 AND SWITCH 2 WOULD TURN ON LIGHT 2. I WIRED THE 5224 THE SAME WAY AS THE OLD SWITCH. NOW ONE SWITCH ON THE 5224 TURNS ...