Craftsman 42 in. Deck 19.5hp Lawn Tractor "linkage" Questions

I need a diagram or schematic of the carb showing the throttle and choke linkages so I can set my linkage for choke and throttle I need to know exactly how the linkages and the spring connects to the ...

gear shift lever is loose and mower will not move. this is on a craftsman lt1000. Trace back the linkage from the shift lever to the transaxle to see if the linkage has come apart. If it is a manual, ...

It will crank but will not die and will not idle up linkage stuck try some carb spray( linkage areas) try to move all linkage by hand to see if moving properly

how to raise the deck of a Toro SS 5000 mower above the highest factroy setting Hi Robert: I'd start by looking at the mechanism with the engine off while someone else moved the height adjust lever ...

...42 inch 17 hp is reving way too high the throttle cable does not apear to be stuck YOUR THROOTLE LINKAGE IS BINDIND WITH THE ENGINE OFF MOVE THROTTLE BACK AND FORTH WATCHING THE LINKAGE ON THE

need exploded view of carb n governor linkage n spring location the govenor spring fits in with the throttle linkage and the other end goes in the govenor...good luck well theres a few things there ...

...side (fwd) of the transmission there is a brake disc. With the wheels off the ground adjust the linkage so that the linkage is longer than before you started. Given your symptom it sounds as if ...

...the wheels were locked, too (could not even push it).  The probelm was that the brake has a linkage into the hydrostatic drive transmission, so that when the brake is applied, no engine force ...

sears craftsman lawnmower has steering linkage poping out of socket It should have a keeper on the top or your linkage is bent, how does it compair to the other side or is this the linkage under the ...

I cannot figure out how to engage my hydrostatic transmission. The lever is disconnected and the linkage is missing. How do I dissengage? The hydro-static transmission has a lever that extends out the