...bagger was bought with the D130 si it is the right one but can't get it to fill bags grass catchers need special shaped or good blades to throw the cut grass into the bag check/ replace the ...
...grass catcher..... Install the discharge deflector at the deck discharge. This is the smaller piece that bends 90 degrees. It will slide into clips on the deck when you have the deck's plastic ...
...to www.searspartsdirect.com, like I did, You found no references to a bag for this mower. It is the same as a Murray rear engine rider and I have not seen a Grass Catcher made for one of them
cant find a grass catcher bag for this model, rear mount give me more info of what type,make & model of the mower's.
...grass to the catcher. Check or replace the blades if worn, clean underneath the deck and also pressure wash the bags as the system relies also on the air been able to vent from the catcher. Hope this ...
...grass catcher is about 1/2 full or more. It seems like there is grass bogging the cutting blade and slowing it down, but it should be able to get a little more full.. hi there danielburgi 1 almost ...
...grass can you tell me if unit has timmed blades and is the unit a rear catching unit ? be sure engine speed is correct most applications this between 3400-3600 rpm if unit has timmed blades - be sure ...
...catcher and the shute constantly plugs up. I mow once a week but it's like there isn't enough vaccum to blow the grass into the bags. I have my blades with the bent part facing down. need a solution. ...
1,292 questions posted
Usually answered in minutes!
1,998 Questions
710 Questions
725 Questions
285 Questions
244 Questions
