Craftsman 42 in. Deck 19.5hp Lawn Tractor "assembly lift" Questions

lift assembly pooped out of position and I can't figure out how to get it off to re-install. Can't fit it on my truck, and don't want expensive time consuming repair for susc a small thing. Don't want

lift assembly on a craftsman ZTS 7500 mower ? MY CRAFTSMAN ZTS 7500 WITH 50" DECK HAS PERT OF THE LIFT ASSEMBLY BROKEN ON THE LEFTSIDE SO IT DRGES THE GROUND AND WE ARE TRYING TO REPLACE IT, SO WE ARE

...assembly or what can you troubleshoot? have someone lift it and see if the cable has broken. or the linkage has come apart.. put cable back on the pulley or replace cable if broken if it has linkages ...

...lift the fender assembly to expose the fuel tank(I have used an engine crane type lift to do this) remove the bracket over the tank remove the tank reassemble in reverse order. If this helps please ...

...assembly. Insert the lift link pin in the pivot support bracket into the lift handle rod. Add the washers and locking pin. Now, Iistall the blade pivot rod. Either end of the blade pivot rod goes ...

...assembly's pulley and lift straight up,align the key way with the key and slip on the clutch assembly and replace the bolt.Torque down the bolt,i can't remember the torque pounds,but i believe it's ...

There is a big, wrap-around lifting bar in the front of my Husky used to raise the engine assembly off the mowing deck but I can't figure out how to free the engine assembly so I can pivot it up to ...

How to access top retainer springs on both lh & rh link assembly lifts for Craftsman Garden Tractor Model # 917,270821, for removal and replacement. with jacks.

lift assembly The lift lever to raise the mower deck broke off. I managed to remove the old assembly okay. But to install the new assembly I had to remove the steering shaft and parking brake. I still

...assembly. You could put the tractor on blocks to lift it up higher so the mower might go a little lower, but it is the same procedure to install the belt. That is the only way I know to install the ...