Question about Clarke Power Products Welding Tools
...used 75/25, argon to CO2 mixture without any problems, the main thing about welding is cleanliness, what your welding always welds better if it is clean. hope this helps. argon for mild steel with ...
...could this be? Hi: This could be a problem of gthe gas you are using. Make sure to use mix 75/25 argon/CO2 for mild steel welding, argon 100% for aluminum and trimix helium/argon/CO2 for stainless ...
...used to. it seems like the argon is not working, like im trying to weld with the tank closed. I checked the tip and argon seems to come out when i hit the trigger.But it seems like I cannot create a ...
does welder need argon gas when using steal wirer Hi: If you are using solid mild steel core wire, yes you need a mix of gas Argon/CO2 75/25. Only cored shielded wire do not required gas (also called ...
used: Mild steel welding requires Argon/CO2 mix 75/25 or 90/10. Using pure CO2 you will create a lot of sparks and a lot of fumes. Stainless Steel welding requires a Trimix gas of Argon/Helium and CO2
...it to work at all. A spool gun works better. Be sure to use correct gas for aluminum. Usually 100%argon, but some people use Argon/helium or helium. Use direct current reverse polarity (electrode ...
...to use cutting torchs. I have a few questions for someone to help me with. I do not have the 75% argon - 25% Co2 gas! Is it better to use the gas and what does it help? My other question is I can ...
...with fluxcore wire in my hobart 140, do I have to buy another mig gun to weld solid wire and using argon/co2 gas mixture? you need ar/co2 95 5 change contact tip to what ever size wire you r going 2 ...
Question about Astro Pneumatic Welding Tools
what are the hot and negatives on my astro power mig welder? If you use argon gas the gun is positive and the clamp is ground/negative. If no gas is used then it is the opposite
Have a lincoln sp200. Trying to run aluminum wire not having any luck. I am running straight argon gas, I get basically a glow the wire melts no penetration. Do I need to reverse polarity or what. I ...
33 questions posted
Usually answered in minutes!
111 Questions
20 Questions
13 Questions