...the handle has separated from the valve. How do I pop the chrome cover to access the small screw to reattach to the valve? I don't want to just pry it off. David HI jazzman45, I'm Harvey the Master ...
then go underneath and loosen up the nuts that hold the faucet in place, then replace the seal and reattach faucet
...out handle and the water flow from the hoses seems fine. I've cleaned the aerator screen but when I reattach everything the water flow will be ok for a few minutes and then will stop or slow once ...
...fitting. Turn the water off to the house, disconnect the supply lines, put the valves on and then reattach the supply lines. Now you have shut offs and can service the
...will turn further for more hot water. It most likely pulls out, then turn it left, reinsert and reattach the
...back on slowly with supply lines draining into bucket so as to flush them out.If water flowed ok reattach lines to faucet turn both angle stops on full and turn faucet on pivoting handle in all ...
We have pressure on the cold water side but not on the hot. The faucet in the bathroom sink has hot water pressure. make sure your water valve is working properly undo line and open valve if its ...
...too hard, loosen the nylon screw a bit, if too loose then tighten it. Once it "feels right" you can reattach the handle and turn the water back on. I suggest turning on the water slowly and look for ...
Question about Plumbing
I have a Bamboo 4 in. Minispread 1-Handle Low-Arc Bathroom Faucet in Heritage Bronze,Model # 67109-8096H. Hot was trickle out. Cold works fine. How do I adjust the hot water to increase the flow? Hot ...
Question about Peerless Industries Plumbing
...plugs up the filter/screen in aerator. Just unscrew the end & flush it out with water. Then reattach. if your pressure still has issues after clearing the aerator as mentioned by the first ...
112 questions posted
Usually answered in minutes!
12 Questions