Question about Plumbing
fix a loose faucet model 989 the nut underneth sink keeps coming loose the nut below sink keeps coming loose. Was this faucet installed recently? Most faucets come with nylon washers that are to be ...
The handle is loose. The handle is loose and the screw seems to be as tight as possible. It is a Moen single handle tub set. might be that the spacer is missing. there is a small brass spacer located ...
How do I tighten a Delta kitchen faucet that has become loose? If it is faucet body on sink loose under sink there should be screws and a plate or washers holding it sink. Tighten them up. Some have a
...of faucet within a couple of months of cart replacement Could be a bad cartridge. Could also be a loose collar. The collar under the handle gets loose and keeps the handle from going all the way ...
...can crack the wood. Wishing you a happy baby! I have the same problem. The screw under the cap fit loosely with Alan key, either one size down is loose or one size up is too small and doesn't fit
handle has come loose, just spins. Most likely the screw in the center of the handle has become loose and just needs to be tightened. Pop off the cover with a screwdriver. and tighten the screw.
will loose pipes cause water hammer banging sound when shutting off water LOOSE PIPES ARE WATER HAMMER.
Question about Delta Faucet Plumbing
base of single handle kitchen faucet is loose where it sits on the counter there should be 2 plastic nuts under the sink that hold the fixture tight to the sink. if they are tight allready try to ...
...to budge I have tried the recommended allen keys but no luck hehe , does your sport screw wont come loose. First drop oil in it and warm in some and then hoping it will get loose, i had it also two ...
How do I take a loose handle off of an American Standard Hampton faucet? The following link is the installation instructions for your faucet. ...
35 questions posted
Usually answered in minutes!
113 Questions