JVC LT42P789 42 in. LCD TV "blinking blue light left lower" Questions

...blue light is blinking and the T.V. doesn't turn on 1. simultaneoulsy press and hold [menu] and [vol-] on TV side panel 2. press and release [power] on TV side panel 3. count to 5 and release[menu] ...

light turns to white.2 seconds seems like a large blue relay on the lower left of power supply clicks and turns power off back to org light no response from any thing.also gree led on ps blinks 3times

...blue. TV doesn't come on. Sounds like main digital board fault. These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea ...

...blue light starts blinking. The following steps should be able to correct the problem: 1) Unplug the TV or remove AC power from the TV 2) Count to ten and then plug in the TV 3) Locate the [Menu], ...

...blinking red and we would lose the picture. I figured I just needed to leave the TV off and let it dry out. My husband got the super intelligent idea of putting the dehumidifier up on the console, ...

blue led and 1 blinking led data is not flowing and change the logic board. Please replace the small signal board Or Call RJO electronics 480-839-6898 I got a Power Supply off E-Bay for this tv and it

...blinking lights so I replaced the power supply board which was damaged. turn tv on then got sound for a sec then nothing. blue lights this time blinked 4 times. got back on and found to look at both ...

...light blue and then blink blue and red. Any ideas please? It's an intermittent fault but becoming more frequent. Thanks Probably you should just disable the Standby feature, though it also depends on ...

...blue light comes on, then then standby light comes on and flashes. no picture, no sound and no help from philips. Anyone knows the cause and possible solution? Help first thing to do is determine if ...

...blinking. I opened it and all caps look good and nothing appears burned out. When I try the factory initiation, the k never comes up. I hear the power click on, "cable channel 2" comes on in a blue ...