Nikon Coolpix S560 Digital Camera "brute force" Questions

There should be some indicator on the battery itself and in the camera for the reight direction. Make sure, when you try to close the cover firmly bu not with brute force. It should snap in eventually

...brute force. i turned it on and off 6 or 7 times while banging on the body beside the lens (to the left if looking at the screen) and it seems to have worked. Systems Error message has gone and i've ...

...here is to not apply "excessive" pressure but using the palm of your hand apply gentle pressure and see if you are able to push the lens back in. Again I stress the word "GENTLE" and not brute

brute force. Release all screws you can find. At the bottom above the o of the word Sony is a plastic lip (or clip) which you cannot see, but holds the camera together. Do be affraid to pull a bit and

...brute force approach. I grabbed hold of the lens and wiggled it from side to side while trying to pull it out (forcefully but being as careful as I could not to damage it) and then there was a small ...

...Can anyone help me solve this problem? The battery has probably swollen, they do when left flat for a long period of time. Brute force is all you can use and hope you don't destroy the

my case; check /proc/partitions to find what the camera has come up as). Next time the camera was turned on it sorted itself out. I used photorec first in 'brute force' mode to get the pictures off it

brute force to the lens untill it is back in place .... :D Send the camera for a repair. If still in warrenty period, and you ahve the proof of purchase, book the repair with the itg: www.kodak.com/go

...my autofocus off and I can't even manually focus. What do I do? Send it to the repair shop Digital cameras like most folk object to brute force. you have probably wreck the focus motor and

...brute force, see previous solutions) and carefully release bits and pieces until you have access to the board. The switch can be resoldered if you have a tiny enough iron, very steady hands (use a ...