Craftsman 6" Bench Grinder with Lamp "wheels" Questions

How do you change the wheels on this bench grinder I cannot tighten the wheels once I change them. There is no stop on the arbor. It spins the same direction as the tightening nuts. Once you get them ...

Grinder wheel wobbling I have an 8'' bench grinder. One of the wheels is wobbling. I checked both wheels for flatness and they are OK. The spindle appears to be running true with no indication of a ...

how to remove wheel on delta 10' grinder Unplug it first, if you like your skin. Use a wrench on the nut, and hang onto the wheel with one bare hand while you turn the nut in the same direction as the

...more quickly with a greater tendency to clog and the wheel will become hot in use and hot grinding wheels soon become dangerous. I hope you will be able to see that by reducing the diameter of a ...

a terrible vibration, unless I pull forward on the motor. What can I do? I would take a look at the wheels or wire brush before I went any further. Then I would remove both and just run the grinder to

Both wheels have a noticeable wobble. Can this be corrected? Yes, the wobble can be fixed. First, remove both wheels and check the shaft bearings/bushings for wear. Make certain the grinder is ...

...from the wheel. This prevents the work from jamming between the toolrest and the wheel. Grinding wheels designed for steel should not be used for grinding softer metals, like aluminium. The soft ...

and the machete, use the grinder for your drill bits and other precision type stuff, don't let the wheels get rounded off or uneven, use a wheel dresser if they do. I have a couple grinders set up in

older black & decker bench grinder I decided that i wanted to replace my coarse grinding wheel with a wire bruch one. Got the 6" B&D wire wheel, took the other wheel off (took forever to get that off)

When I turn on grinder, the motor hums but wheels don't turn. I tried to adjust the wheel nuts and finally got the wheels to turn but the motor will stop with just a slight amount of pressure to the ...