Lutron #D-600PH-DK 600W SP Push Rotating Dimmer "maestro dimmer turn" Questions

...makes products that are compatible in their Ariadnia/Toggler & Diva product families, but not Maestro - you just need to make sure the dimmer itself identifies itself as compatible with

...Maestro dimmer manual to see FASS illustration http://www.lutron.com/TechnicalDocumentLibrary/0301106A.pdf 2) If this is new installation, then double-check your wiring and check that load matches ...

...Maestro dimmer rocker stopped working I have a Lutron Maestro dimmer, and the rocker stopped working. It feels like the rocker switch failed mechanically - there used to be resistance when it was ...

Maestro+IR%C2%AE+dimmer You posted under MIR600 single pole digital fade dimmer for incandescent and halogen. Installation manual: http://www.lutron.com/TechnicalDocumentLibrary/030864b.pdf If this is

...Maestro Fan/Light Dimmer installed in all of the bedrooms. I ran into this strange problem last night which I have never seen before. The wall which has the dimmer switch installed, has a double ...

...dimmer vs. a manual knob or slider. Consider using a Maestro (MA-600-XX where XX is the color). The Maestro fits into a decora opening so you may also want to get a new wallplate (Lutron makes these ...

more info-- is the light part of the fan, is there a separate wire for fan motor and light? what type of switch is controlling the light (assuming the maestro dimmer is controlling the fan motor etc..

...Maestro dimmer on 2 20 w hallogen bulbs and the dimmer when turn off or on dims the lights rapidlyup and down. When you say "halogen bulbs," are you referring to MR-16 (12-Volt) lamps off a ...

...Maestro Dimmer 3 ways installed for about a year. Just yesterday we lost power a couple times and now they don't work. Any ideas? Your dimmers took a voltage spike when the power came back on after ...

Maestro fan-light dimer, but don't say what type of wall device this is. It sounds like electronic switch. 1) Surge might have burned out device electronics. Turn off circuit breaker and see if device