...bowl and the depth of the p-trap inside the toilet adjust the flapper may not be coming up all the way and shutting the water fill to quick other is fill line not connected right and water is going ...
...fill level up and down but that makes no difference in the toilet bowl. I think we have the least expensive fluidmaster but don't know the model. Thanks. There should be a small black rubber tubing ...
...fill the bowl to the level of other same toilet. Water level in bowl is low. Water Level Adjustment 1. To adjust, simply turn upper half of valve counter-clockwise to unlock, pull up till water line ...
bowl doesn't fill When i flush the toilet, the tank fills quickly but there is very little water in the bowl. What do I do to get more water in the bowl? there is an ajustment on top of float assembly
...fill level will not increase the amount of water in the bowl. The bowl fills to a certain point, and then as more water is added it starts to go over the built in trap, and down the drain. When you ...
...fill level valves, but does not put enough water in the bowl to clean properly. Have adjusted the water level to its highest level, still not filling bowl like it used to. Any ideas ? If it has a ...
...bowl to start with may be due to a lost or mis-connected fill tube that directs some water into the toilet tank standpipe (and thus into the bowl below), while the toilet tank is being re-filled. ...
...bowl fill up more.....google your problem if you dont understand...depends on what kind of tower you have....should have teeth on the tower itself to make it fill more...try pulling up on the
adjust it somehow to leave more water in the bowl? Make sure the fill tube in the tank from the fill valve is in the overflow tibe inside tank. The tube allows bowl to fill with water to correct level
39 questions posted
Usually answered in minutes!
