...it fixed right. If water is continuing to run into the bowl then the flapper that closes off the flush valve is not making a proper seal. The flapper may be warped or the wrong style for your
...toilet you will see that a flapper valve lifts to let the water drain from the tank. The flapper valves are designed to stay in the closed position when the tank fills, but to float when the tank is ...
flapper closes before toilet has completely flushed, sometimes those flappers get leaks in them and water seeps into the inside and doesnt allow the flapper to stay afloat long enough for the water to
Question about Home
flapper. How do I finally get this toilet set so that it flushes properly and not leak from the flapper. The flapper valve should be adjusted so it has only enough chain/rope to close plus a bit extra
Question about American Standard Home
...toilet keeps leaking from tank to bowl--replaced all internal parts not sure which American Standard -- it has been in my house for 20 years I think. This toilet has had problems with leaking from ...
How do I Stop leak down side into water in the bowl between flushes? already replaced flapper Was the flapper chain adjusted properly? If too tight it will not sit flat to close the hole. If too loose
...toilet seat Loose. Needs to be tightened Check the chain the goes between the handle and the flapper. It should not be taught. If it is it will not permit the flapper to seat properly and water will ...
...flapper) is leaking. Some of these rubber flappers snap on to posts. Others, slide down the overflow tube. Others are the plunger type that lift straight up and down (some of these have a gasket on ...
Question about VitrA Home
...water or the whole flush valve will need to be replaced. After putting pressure in the flapper and it stops leaking then you just need to put a weight inside the flapper to keep it
Question about Home
...flapper today for my toilet. The package said "replacement for Kohler Cimarron, which is my toilet model. Your part number is 04-1545. This flapper is obviously a bit small and leaks The attaching ...
7 questions posted
Usually answered in minutes!