...to take off the tank lid? this is an old question and there was a picture posted on how to take lid off. I cannot read diagram. can u help I would suggest to try turning that knob
...the nut from standpipe assembly. Buy new gasket and install back on bottom of tank over Nut for standpipe. Put tank back on toilet bowl. Install bolts and tighten. reconnect water line and turn
tank is full Toto toilet is constantly running even though the tank is full it sounds like it might be the floater ball in the toilet you can adjust the tension on it usually with a screwdriver.... if
...toilet continues leaking water? We have tried to unscrew the seal around flushing press components without success. Sorry to read about your problem, I hope this helps you out. maybe somebody glued ...
...toilet from continually running? Remove the lid from the tank. Verify that the tank is full. Shut off the water to the tank, at the wall. Wait 5 minutes. If the level has fallen in the tank, the ...
i have a center tank pull up flush, how do i remove the knob from the shaft to take off the tank lid? I've added a image I hope this helps.
Question about VitrA Home
...toilet back is removed does the seal need to be replaced? Yes the rubber gasket between the bowl and the tank should be replaced, because it takes the imprint of the flush valve and ther's no way to ...
...with flat head screwdriver GENTLY ease lid up and away from the securing lugs at each end. To refit... rubber seal fits to lid and using a rubber mallet gently hammer the lid back on to the
...Eljer Berkeley. How to replace?? One piece toilet, and tank does not remove. I do not see any screws or bolts in order to remove flush valve and replace. ...
...tank lid. When you go to put the top back you will have to align the flush pin gears in the slot. If your talking about the seat.... then there are 2 nuts underneath the water closet at the back that ...
17 questions posted
Usually answered in minutes!
50 Questions
35 Questions
40 Questions