...re-locks at the rear of the stapler frame. One staple ejects per squeeze of the firing lever--hold the nose of the stapler firmly to the material to allow penetration of the staple. Hope this
...Stapler gun? I was having the problems everyone listed... with the staples loading & firing... I guess the instructions are lousy .. should be ON THE PACKAGE to make it clear.. but.. on the ...
stapler repair where abouts near newcastle can you get an arrow electric stapler repaired looks like firing switch inoperative Sydney 02 8004 2111 you might have to post to sydney for service
Question about Arrow Tools & Hardware - Others
MY SEARS 9.6 VOLT NARROW CROWN STAPLER WILL FIRE ONE TIME OR TWO, THEN QUIT. IF I PULL THE BATTERY BACK FROM ITS LOCKED POSITION ABOUT 1/4" IT WILL FIRE EVERY TIME. GOT ANY IDEAS? I LIKE THIS STAPLER ...
will not staple !) Staples are jammed...clear out. 2) No staples... fill with staples 3) push down on handle to fire staple
Question about Staples Tools & Hardware - Others
HOW AND WHERE DOES THE SMALL PLASTIC WEDGE GO BACK INTO THE STAPLE GUN stapler together BUT doesn't fire staples How to Use Staple Gun Staple Gun Tutorial
Question about Staples Tools & Hardware - Others
Nothing happens when you load paper to staple. It is a swingline electric stapler model 270 assuming it is plugged into a good power source and turned on (no offense intended, just getting the obvious
firing I have a similar problem. The stapler fires more than once, usually double and sometimes three times. Could it be that the trigger contact needs cleaning? I opened my stapler and found that the
Question about Arrow Tools & Hardware - Others
...staples out this is common even on bigger models I have a T50 stapler that when you pulled the trigger, it appeared to work, but no staple was fired. On investigation, I found that the part that ...
21 questions posted
Usually answered in minutes!
65 Questions
25 Questions
28 Questions