...the butterfly valve the butterfly valve works of the throttle control lever as the position depends on how much you open the throttle. it is the valve closest to the head when fitting the ...
...position. Depress the "Throttle Lock" lever located beside the engine "On/Stop" switch. Keeping the lever depressed, squeeze the throttle trigger. Release the throttle lock. This sequence holds the ...
throttlc cable how to install throttle cable in ryobi trimmer 30000a Disassemble the handle. Remove the cable and pay attention to the HOOK in the carb throttle. Install the new cable in the exact ...
...position of the throttle, needle screw settings or idle screw position. The carb has been disassembled, cleaned and reassembled, using the original gaskets, they looked new. This problem started ...
Trimmer just idles will not run full speed check your choke cable for proper function; at full throttle, butterfly valve should be perpendicular to the throttle body. Also check your fuel filter for ...
throttle in the next position up (Middle position) the trimmer will run for awhile but then quit. If you try to put the throttle lever in the high speed position(all the way up) it will cut the engine
...carburettor? Thanks for your Help. Kevin Sounds like it might be getting to much gas. What position is the choke in during all of this? If you're giving it throttle it may be flooding itself
Question about Husqvarna Garden
position for your use ( at full throttle your thumb should not be straining ) now slacken the lower cross head screw and turn the silver clamp to tention the spring underneath, when correctly adjusted
...throttle is moved to the stop position Look down on the left side of the engine where the throttle cable attaches to the control linkage. There is a bolt that holds the black plastic cable in a clamp ...
155 questions posted
Usually answered in minutes!
370 Questions
62 Questions
64 Questions
42 Questions