Husqvarna 28cc Gas Line Trimmer "starter pawl" Questions

...to start it clicks like a geer is bad This is a problem with either the starter pulley ( rope pulley) if the corners are worn it will not engage with the pawls, or the pawl/pawls them selves have ...

rope to start want recoil The starter pawls on this model are exposes to weather. You can usually spray WD-40 directly to the flywheel pawls and loosen with a screwdriver.

...difficult to pull. Any suggestions Yep, starter pawl spring or pawl itself. I don't know what trimmer you have but most are set up like this. Something engages the flywheel so you have to start

Repalement parts pawls and everything connected or associated with the pull starter Need to replace plate, pawls,nut, pull coil & housing where to find the parts? Maybe REPAIRCLINIC.COM

i have trimmac 210 and the pull cord works fine but will not connect to the starter pulley the pull start cog will not connect to the starter You have an issue with the starter pawl.

i have trimmac 210 and the pull cord works fine but will not catch the starter pulley any one got a exploded view of pull starter You have an issue with your starter pawl.

...something's missing The starter pulley looks fine, however the small starter pawl and spring is missing rom the starter cup on the crank, it should be retained with a c clip from behind the ...

...the pull cord it pullsbut it just goes click click click like its not catching on what it suppossed to turn when pulling You probably have a broken starter pawl, remove recoil starter and ...

starter pawl Replace Starter Pawl http://www.mediafire.com/view/9duor5dwblekisn

i ned new starter pawl ratchet for 125l HandymanJ has the perfect solution. I did it and it worked great. Thanks.